2 DISASSEMBLY OF COMPONENTS 2 DISASSEMBLY OF COMPONENTS
EF494T TM 06/2011 edition
(4) Remove the return pipe (A) from the fuel tank,
and disconnect coupler to fuel gauge (B)
located in section C. Then, remove the bolts
(D).
CAUTION
The rubber packing (A) is used when installing the
fuel tank. Be sure to reinstall it when reassembling
the tractor.
(5) Slide the fuel tank upward to remove it.
(6) Remove the differential gear lock pedal return
spring (A) from the seat stay, transmission
breather (B), and then the piping and wiring
clamps (C) and (D).
(7) Remove the four M8x16 bolts (E) and the two
M8x25 bolts on the back of the seat, and
remove the seat stay.
To Next Page
Loading...
