YASKAWA CIPR-GA50C series - User Manual

YASKAWA AC Drive GA500
Installation and Operation Instruction
Type CIPR-GA50Cxxxxxxxx
200 V Class, Three-Phase Input: 0.1 to 22 kW
200 V Class, Single-Phase Input: 0.1 to 4.0 kW
400 V Class, Three-Phase Input: 0.37 to 30 kW
PDF

YASKAWA CIPR-GA50C series Specifications

General

Brand	YASKAWA
Model	CIPR-GA50C series
Category	Controller
Language	English

Summary

English Language Section

General Information and User Qualifications

Manual overview, product specifications, and required user qualifications for operation.

Safety, Intended Use, and Liability

Covers safety instructions, signal words, intended use, and Yaskawa's liability limitations.

Keypad Interface

Keypad Layout and Functions

Details the keypad layout, buttons, and LED indicators for operation.

Installation Procedures

Installation Environment and Conditions

Specifies environmental requirements like temperature, humidity, and location.

Cover Removal and Electrical Wiring

Details procedures for cover access and safe electrical wiring.

Standard Connection Diagram and Wire Selection

Illustrates wiring and provides guidance on selecting appropriate wires.

Control Circuit Wiring Specifications

Specifies wire gauges and torque values for control circuit connections.

Drive Start-Up and Configuration

General-Purpose Setup Mode

Guides users through initial drive setup using the General-Purpose Setup Mode.

Key Drive Parameters

Lists and describes key parameters for drive configuration and operation.

Troubleshooting Guide

Fault Reset Procedure

Steps to clear faults and alarms from the drive system.

Fault and Alarm Identification

Details common faults and alarms, their causes, and possible solutions.

Disposal and Regulatory Compliance

Disposal Instructions and WEEE Directive

Guidelines for proper disposal and compliance with WEEE Directive.

European Standards and CE Compliance

Information on CE marking, Low Voltage, EMC, and Machinery Directives.

EMC Directive and Related Requirements

CE Low Voltage Directive Compliance

Confirms compliance with the CE Low Voltage Directive and conditions.

Area of Use and Fusing Requirements

Specifies installation location criteria and input side fusing requirements.

EMC Directive and Wire Selection

Guidance on EMC compliance, filters, and wire selection.

Internal EMC Filter Configuration

Instructions for enabling or disabling the drive's internal EMC filter.

Safe Disable Functionality

Safe Disable Specifications and Standards

Details safe disable input specifications and applied safety standards.

Safe Disable Circuit and Operation

Explains the safe disable circuit, its inputs/outputs, and enabling/disabling.

Safe Disable Monitor Output and Keypad Display

Relates input status to monitor output status and keypad display.

Attachment: UL Standards

UL Standards and Compliance Information

Information on UL certification, standards, and requirements for UL approval.

UL Installation Requirements

Specifies UL installation location, temperature, and wiring for compliance.

UL Branch Circuit Protection and Control Wiring

Lists recommended fuses for UL protection and low voltage wiring specs.

Drive Motor Protection Features

Motor Overload and Overheat Protection

Configures electronic thermal overload and overheat protection for motors.

Motor Thermistor Alarm and Fault Selection

Determines drive action based on PTC input signals for overheat conditions.