YASKAWA L1000A - Page 234

C Standards Compliance
232 YASKAWA ELECTRIC TOEP C710616 38H YASKAWA AC Drive-L1000A Quick Start Guide
Note: Use crimp insulated terminals or insulated shrink tubing for wiring connections. Wires should have a continuous maximum
allowable temperature of 75°C (167°F) 600 Vac UL-approved vinyl-sheathed insulation.
4/0 AWG × 2P
M10 100-L10 YF-1, YET-150-1 TD-228, TD-214 TP-100 100-051-559
M12 100-L12 YF-1, YET-300-1 TD-324, TD-312 TP-100 100-051-560
250 / 300 kcmil
M10 R150-10 YF-1. YET-150-1 TD-229, TD-215 TP-150 100-051-272
M12 R150-12 YF-1, YET-300-1 TD-325, TD-313 TP-150 100-051-273
250 kcmil × 2P
300 kcmil × 2P
M10 150-L10 YF-1, YET-150-1 TD-229, TD-215 TP-150 100-051-561
M12 150-L12 YF-1, YET-300-1 TD-325, TD-313 TP-150 100-051-562
350 kcmil M10 180-10 YF-1, YET-300-1 TD-326, TD-313 TP-200 100-066-687
400 kcmil M10 200-10 YF-1, YET-300-1 TD-327, TD-314 TP-200 100-051-563
350 kcmil × 2P M12 180-L12 YF-1, YET-300-1 TD-326, TD-313 TP-200 100-066-688
400 kcmil × 2P M12 200-L12 YF-1, YET-300-1 TD-327, TD-314 TP-200 100-051-564
500 kcmil
600 / 650 kcmil
500 kcmil × 2P
600 kcmil × 2P
M10 325-10 YF-1, YET-300-1 TD-328, TD-315 TP-325 100-051-565
M12 325-12 YF-1, YET-300-1 TD-328, TD-315 TP-325 100-051-277
<1> Codes refer to a set of three crimp terminals and three insulation caps. Prepare input and output wiring using two sets for each connection.
Example 1: Models with 300 kcmil for both input and output require one set for input terminals and one set for output terminals, so the user
should order two sets of [100-051-272].
Example 2: Models with 4/0 AWG × 2P for both input and output require two sets for input terminals and two sets for output terminals, so the
user should order four sets of [100-051-560].
Wire Gauge
Terminal
Screws
Crimp Terminal
Model Number
Tool
Insulation Cap
Model No.
Code <1>
Machine No. Die Jaw
TOEP_C710616_38H_7_0.book 232 ページ ２０１５年１１月１１日 水曜日 午後７時４０分