YASKAWA Motoman DX200 - Conveyor Monitoring Displays for Shift Functions; 5.1 CV (SYNCHRONIZATION) MONITOR Display

5-1
165553-1CD
HW1482183
5 Conveyor Monitoring Displays for the Shift Functions
Conveyor Synchronized
Funciton with Shift
Functions
5 Conveyor Monitoring Displays for the Shift Functions
To monitor the conveyor synchronized status when using the shift
functions, use the following display.
• CV (SYNCHRONIZATION) display
To monitor each shift status, use the following four displays.
• CV START SHIFT STATUS display
• CV WORK ID SHIFT STATUS display
• CV WORK IN/NOT SHIFT STATUS display
• CV SHIFT MONITOR display
 Open the CV (SYNCHRONIZATION) Display
Open the CV (SYNCHRONIZATION) display in the following manner.
 Open the CV (SHIFT) Display
Open the CV (SHIFT) Display in the following manner.
 Open the CV SHIFT MONITOR Display
Open the CV SHIFT MONITOR Display in the following manner.
*Displayed in new units shipped with version DN1.60-000 and later.
Select {ROBOT} under the main menu  Select {CV (SYNCHRONIZATION)} 
The conveyor synchronization section monitor display appears  Open the
desired display
1)
1 Pressing the [PAGE] switches the
display.
Pressing [SHIFT] + [PAGE] returns to
the previous display.
*Not displayed in new units shipped with version DN1.60-000 and later.
Select {ROBOT} under the main menu  Select {CV (SHIFT)}  The CV START
SHIFT STATUS display appears  Open a desired display
1)
1 Press the area key, move the cursor to
{DISPLAY} and press [SELECT]. Then,
select the CV START SHIFT STATUS
display, the CV WORK ID SHIFT
STATUS display, or the CV WORK IN/
NOT SHIFT STATUS display.
Select {ROBOT} under the main menu  Select {CV SHIFT MONITOR}  The
CV SHIFT MONITOR display appears
71 of 98