2 Display and Operations of Panel Screen
FS100 2.1 Interface Panel Display
2-4
HW1480724
HW1480724
2.1.4 Numeric Display
Follow the operations as below to display numeric values on the panel
screen
1. Set the item "PANEL TYPE" in the I/F PANEL SETUP screen to either
"Counter" or "Preset counter".
– Numeric value will be displayed in either three-digit number or six-
digit number according to the setting of indicated value.
– If the indicated value exceeds the specified number of digits (three-
digit or six-digit), an asterisk "*" appears instead of numeric value.
Three-digit display:
Six-digit display:
2.1.5 Input of Numeric Value
1. Set the item "PANEL TYPE" in the I/F PANEL SETUP screen to
"Preset counter".
2. Hold down [INTERLOCK] and touch the icon of "Preset counter" or
move the cursor to the icon of "Preset counter", then press [SELECT].
– Numeric values can now be entered in the Preset counter.
Three-digit display: ⇒
Six-digit display: ⇒
3. Enter numeric values with the numeric keypad.
– Numeric values in the range from -99 to 999 can be entered in the
three-digit preset counter. Numeric values in the range from -99999
to 999999 can be entered in the six-digit preset counter.
No other numeric value is unable to be set except for the possible
range of settings shown below:
–
<Possible range of settings>
B-variable: 0 to 255
I-variable: -32768 to 32767
Register: 0 to 65535
NOTE
Numeric values cannot be entered in the Preset counter dur-
ing playback.
To Next Page
Loading...
