2 Display and Operations of Panel Screen
FS100 2.1 Interface Panel Display
2-5
HW1480724
HW1480724
2.1.6 Change of Panel Screen
Follow the operations as below to change the file number of Interface
panel. There are two ways of changing file number.
1. Press the page key .
– The panel page changes one by one in the forward direction.
– Hold down SHIFT key and press to change the panel in
the backward direction
2. Instruct the page to be shown by the Touch panel directly.
Press [Shift] to show panel pages 6 to 10.(Pages 1 to 5 when pages 6 to
10 are displayed.)
2.1.7 Change of Language on Screen
The language can be changed only when bilingual function is enabled.
1. Hold down SHIFT key and press AREA key .
– The language on the screen changes.
GO BACK
PAGE
SHIFT
GO BACK
PAGE
SUPPLE
-MENT
Unless panel names and group names are set in each lan-
guage mode, the panel names and group names will not be
displayed when the screen is changed to the subject lan-
guage mode.
In such a case, set the panel names and group names in the
subject language mode.
SHIFT
AREA
To Next Page
Loading...
