3 Data Setting and Touch Panel I/F Instructions
FS100 3.1 Setting Procedure
3-3
HW1480724
HW1480724
3.1.1 I/F Panel Setting Data and Display Position
1. Move the cursor to the item "ARRANGE" in the I/F panel setting
screen, then press [SELECT].
– The arrangement setting screen appears.
– An item with an asterisk "*" indicates that the item has already been
set (the setting is enabled).
– The display position of set data is as follows:
2. Move the cursor to the position where the item is to be arranged and
press [SELECT].
– Using the page key or the [PAGE] button changes the control
group of the arrangement setting screen and a user can select the
position where the item is to be arranged.
GO BACK
PAGE
To Next Page
Loading...
