3 Data Setting and Touch Panel I/F Instructions
FS100 3.1 Setting Procedure
3-7
HW1480724
HW1480724
3.1.8 Editing of Interlock Enable
1. Move the cursor to the item "INTERLOCK ENABLE" in the I/F panel
setting screen and press [SELECT].
– The status of INTERLOCK ENABLE switches between "PROHIBIT"
and "PERMIT" with each pressing of [SELECT].
NOTE
Be aware that operations are allowed without pressing the
INTERLOCK key simultaneously if the item "INTER-
LOCK ENABLE" is set to "PERMIT".
INTER
LOCK
To Next Page
Loading...
