2 Display and Operations of Panel Screen
FS100 2.1 Interface Panel Display
2-1
HW1480724
HW1480724
2 Display and Operations of Panel Screen
2.1 Interface Panel Display
2.1.1 Panel Screen Display
Follow the operations as below to display the Interface panel.
1. Press {I/F Panel}.
– The interface panel screen is displayed.
2. Press {I/F Panel} while the Interface panel appears on the screen.
– Interface panel screen closes and the screen goes back to the
previous display.
NOTE
Due to some conditions during an operation, Interface panel
may not appear on the screen.
In that case, the message “Cannot display at current opera-
tion mode” appears when {I/F Panel} is pressed.
To Next Page
Loading...
