5 Editing Saved Data
FS100
5-3
HW1480724
HW1480724
2: B-variable (B000 to B099: numbers are 3-digit)
3: I-variable (I000 to I099: numbers are 3-digit)
4: Register (M000 to M999: numbers are 3-digit)
<D15>: Number
<D16>: Output Contact 1 0: A-contact 1: B-contact
<D17>: Output Type 2
0: None
1: Signal (numbers are 5-digit)
2: B-variable (B000 to B099: numbers are 3-digit)
3: I-variable (I000 to I099: numbers are 3-digit)
4: Register (M000 to M999: numbers are 3-digit)
<D18>: Number
<D19>: Output Contact 2 0: A-contact 1: B-contact
<D20>: Second language panel name on the 1st line (10 one-byte
characters)
<D21>: Second language panel name on the 2nd line (10 one-byte
characters)
<D22>: Second language panel name on the 3rd line (10 one-byte
characters)
<D23>: Optional 0: Standard
CAUTION
• Syntax error will occur when inserting line feeds into the data "Data
Example".
• Syntax error will occur when the number of commas differs from the
saved data in FD/PC card.
• Define capital letters for variables.
• Wrong signal range or type instruction will make the attribute invalid
when loading.
• Loading for one item is possible as follow;
//IFPANEL 4
///NAME Panel 4, Panel 4
1A,0,0,0,1,NAME1,NAME2,NAME3,1,1,0,11111,0,0,0,0,0,0,0,NAM
E1,NAME2,NAME3,0
To Next Page
Loading...
