YASKAWA SGM7E

6.4 Selecting Cables
6.4.4 Relay Encoder Cables of 30 m to 50 m
6-15
6
Specications, Ratings, and External Dimensions of SGMCV Servomotors
6.4.4 Relay Encoder Cables of 30 m to 50 m
*1. Flexible Cables are not available.
*2. Refer to the following section for the flange specifications.
6.1 Model Designations on page 6-2
*3. Use one of these Cables if a battery is connected to the host controller.
Servomotor
Model
Name
Length
(L)
Order Number
*1
Appearance
SGMCV-

Flange specifica-
tion
*2
: 1
Encoder-end Cable (for
single-turn/multiturn
absolute encoder)
0.3 m JZSP-C7PRC0-E
SGMCV-

Flange specifica-
tion
*2
: 1 or 4
Cables with Connec-
tors on Both Ends
(for single-turn/multi-
turn absolute encoder)
30 m JZSP-UCMP00-30-E
40 m JZSP-UCMP00-40-E
50 m JZSP-UCMP00-50-E
SGMCV-I
Flange specifica-
tion
*2
: 1 or 4
Cable with a Battery
Case
(for multiturn absolute
encoder)
*3
0.3 m JZSP-CSP12-E
SERVOPACK
end
Encoder end
L
SERVOPACK
end
Encoder end
SERVOPACK
end
Encoder end
Battery Case
(battery included)