YASKAWA SGM7E

5.2 Specifications and Ratings: Small Capacity
5.2.4 Servomotor Overload Protection Characteristics
5-7
5
Specications, Ratings, and External Dimensions of SGM7F Servomotors
5.2.4 Servomotor Overload Protection Characteristics
The overload detection level is set for hot start conditions with a Servomotor surrounding air tem-
perature of 40°C.
Note: The above overload protection characteristics do not mean that you can perform continuous duty operation
with an output of 100% or higher.
Use the Servomotor so that the effective force remains within the continuous duty zone. Refer to the following
section for the effective torque.
5.2.3 Torque-Motor Speed Characteristics on page 5-6
10000
1000
100
10
1
SGM7F-
A and -B SGM7F-08C
0 50 100 150 200 250 300
10000
1000
100
10
1
SGM7F-17C and -25C
0 50 100 150 200 250 300
SGM7F-35D
10000
1000
100
10
1
0 50 100 150 200 250 300
SGM7F-16D
10000
1000
100
10
1
0 50 100 150 200 250 300
Detection time (s)
Torque reference (%)
Detection time (s)
Torque reference (%)
Detection time (s)
Torque reference (%)
Detection time (s)
Torque reference (%)
Detection time (s)
Torque reference (%)
10000
1000
100
10
1
0 50 100 150 200 250 300 350