4.2 Specifications and Ratings
4.2.4 Servomotor Overload Protection Characteristics
4-6
4.2.4
Servomotor Overload Protection Characteristics
The overload detection level is set for hot start conditions with a Servomotor surrounding air
temperature of 40°C.
Note: The above overload protection characteristics do not mean that you can perform continuous duty operation
with an output of 100% or higher.
Use the Servomotor so that the effective force remains within the continuous duty zone. Refer to the following
section for the effective torque.
4.2.3 Torque-Motor Speed Characteristics on page 4-5
SGM7E-02B, -05B, -07B, -10C, -17D, and -35E SGM7E-04C
SGM7E-14C
SGM7E-25D
SGM7E-08D and -16E
Detection time (s)
Torque reference (%)
Detection time (s)
Detection time (s)
Detection time (s)
Detection time (s)
Torque reference (%)
Torque reference (%)
Torque reference (%)
Torque reference (%)
0 50 100 150 200 250 300
10000
1000
100
10
1
0 50 100 150 200 250 300
10000
1000
100
10
1
0 50 100 150 200 250 300
10000
1000
100
10
1
0 50 100 150 200 250 300
10000
1000
100
10
1
0 50 100 150 200 250 300
10000
1000
100
10
1
To Next Page
Loading...
