Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
5 of 77
General Safety Messages
1.3
Electric Shock Hazard
Components with hazardous voltage and energy will electrocute operator. Operator shall
avoid touching live components with hazardous voltage and energy.
Unqualified Operator Hazard
Operator may cause a hazardous situation by making incorrect installation or wiring
connections. A qualified technician shall do all installation and wiring connections to
comply with all local, national, or country specific guidelines for safety.
Electrical Shock Hazard
Operator may contact components with hazardous voltage and energy. Use proper
safety equipment including Personal Protective Equipment (PPE) when de-energizing
the unit. De-energize the unit, wait 5 minutes, and verify the absence of voltage before
opening the equipment or removing any protective shields.
General Damage to Equipment
Attempting to service the inverter improperly may result in damage. Contact Yaskawa
Solectria Solar Technical Support for maintenance.
Read and Follow Instructions
Failure to read and follow instructions may void the warranty. Install the inverter
according to the instructions in this manual.
SAVE THESE INSTRUCTIONS
This manual contains instructions for models:
XGI 1500-125/125
XGI 1500-125/150
XGI 1500-150/166
XGI 1500-166/166
To Next Page
Loading...
