Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
55 of 77
Event and Fault Logs
5.12
This screen allows a user in Administrator mode to view the event and fault logs.
Figure 5-36 Events and Fault Logs
Edit Inverter List
5.13
This screen allows a user in Administrator mode to add or remove inverters from the network. A new inverter
must be detected in order to add it to the network.
Figure 5-37 Edit Inverter List
In Figure 5-37 there are three inverters with network issues. If the inverter with IP Address 10.25.187.89 is no
longer part of the network, it can be removed. If inverters are detected on the network but are not added to the
cluster, click the Add button to add them to the cluster.
To Next Page
Loading...
