Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
12 of 77
Inverter Size, Spacing and Mounting
3.2
The dimensions of the XGI 1500 inverter are shown in Figure 3-1.
Figure 3-1 Inverter Dimensions
Mount the inverter to 1
5
/
8
inch strut channel as shown in Figure 3-4. Ensure that the strut channel structure is
capable of supporting 245 lbs (111 kg) plus an effective safety margin. Structural integrity of the strut structure
is the responsibility of the installer. Space the inverters no closer than shown in Figure 3-2 for thermal exhaust
and wiring clearance. Keep this area free from debris, vegetation, and other obstructions.
Figure 3-2 Inverter Minimum Spacing and Mounting – Top View
41.3 in
1048 mm
34.9 in
886 mm
34.9 in
886 mm
To Next Page
Loading...
