Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
58 of 77
First Time Startup Wizard
5.16
When the inverter is started up for the first time, the user will be prompted to run the first-time Startup Wizard.
The wizard comprises several screens to facilitate setting up the network of inverters. The wizard can also be
accessed from the menu at any time.
For more information on the First Time Startup Wizard, refer to the Quick Startup Guide shipped with the
inverter.
Figure 5-40 Prompt to Run the First Time Startup Wizard
Figure 5-41 First Time Startup Wizard Sequence
See Section 5.2 for details on the screens that comprise the First Time Startup Wizard.
To Next Page
Loading...
