Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
52 of 77
Wi-Fi Configuration
5.9
This screen allows a user in administrator mode to define the SSID for a cluster of inverters.
The Wi-Fi Network can be disabled by de-selecting this checkbox.
The SSID has 3 components: Site ID, Cluster ID, and channel.
The format of the SSID becomes [Site ID]-[Cluster ID]-[Channel].
Define the Site ID with a unique name to identify the site.
Define the Cluster ID with a number. For large sites separate the
inverters into multiple clusters with each cluster having a unique ID.
Select a channel from the drop-down menu. If the network
seems slow, try changing the channel as the channel selected
may have other devices on it.
These changes apply to all inverters in the detected cluster if the
user selects this checkbox.
Figure 5-32 Wi-Fi Configuration
If the Wi-Fi network is disabled, it can only be re-enabled by a wired ethernet connection. When Wi-Fi
networking is disabled, connect a laptop or other computer with an Ethernet cable to the inverter network. The
web browser on the computer can access this menu to re-enable Wi-Fi networking features.
To Next Page
Loading...
