YASKAWA V1000 MMD User Manual

4 Keypad Operation
EN 32 YASKAWA Europe TOEP C710606 101A - V1000 MMD IP65 Motor Mounted Drive - Quick Start Guide
LED Status Ring
(7)
Ready
On: No failure present, Drive Mode, STO disabled
Flashing: No failure present, STO enabled
Off: Programming mode, or Fault occurred, or internal error
(8)
ALM/ERR
On: When the drives detects an alarm or error
Flashing: Alarm occurred, oPE detected, or fault/error
occurred during Auto-Tuning
Off: No fault or alarm present
(9)
RUN
On: During Run
Flashing: During deceleration to stop, or when a Run com-
mand is input and frequency reference is 0
Flashing quickly: During deceleration at fast-stop, or during
stop by interlock operation
Off: During stop
Item Name Function
WWW.NNC.IR

YASKAWA V1000 MMD Specifications

General

Series	V1000
Model	MMD
Input Voltage	200-240 VAC, 380-480 VAC
Output Power	0.4 kW to 315 kW
Control Method	V/f control
Protection Features	Overcurrent, Overvoltage, Undervoltage, Short circuit