4.3.16 SKIP FUNCTION(G31) OPERATIONFAILURE
Trouble
Input failure of skip
signal
Parameters
Others
Check Procedure
Check~ #1280 DO.
● Chattering must be eliminated.
GSignal should exceed 5 m Sec.
m#6232(G31F) value is not set.
#6031 Dd setting
+24V
Ov
J
‘1’
Case O
Case 1
#6032 setting
D, only should beat 1, but all Do, Dz
and Dx should be at O.
Optional
Solution
● Replace LS and/or proxim-
ity switch.
● Check noise level.
Change wiring route.
Correct parameter settings.
Contact machine manufac-
turer.
–43–
To Next Page
Loading...
