YASKAWA yasnac lx3 - Page 76

APPENDIX1 LIST OF ALARMCODE(Cent’d)
Cc]de
Causes
060
PROGERROR(G34)
LEADINCREASE/DECREASEVALUEEXCEEDING
MAXItlUMPROGRAMMABLEVALUEDURINGVARIABLE
LEADTHREADCUTTING.
MINUSVALUEOF LEADCOMMANDED.
SEE TOE-C843-9.20 PAR.2.8.17.
061
PROGERROR(Gil/G121N THREAD)
ROUNDING,BEVELINGCOMMANDEDIN THREAD
CUTTINGBLOCK.
THESECOMtlANDSPROHIBITED.
062
PROGERROR(G32/33)
THREADCUTTINGCOMIIANDEDIN G98 MODE.
MULTI-STARTTHREADCUTTINGCOMMANDB OUTOF
SPECIFIEDRANGE.
SEE TOE-C843-9.20 PAR,2.8.15 AND2.8.16.
063
PROGERROR(G92/G78/G21)
RAPIDTHREADPULL-UPVALUEIN X-AXISDIREC-
TION IN THREADCUTTINGWITHBEVELINGSMALLE
THANBEVELINGVALUESET BYPARAMETER.
SEE TOE-C843-9.20 PAR.2.8.26.2.
064
PROGERROR(G92/G78/G21)
RAPIDTHREADPULL-UPVALUEIN Z-AXIS DIREC-
TION IN THREADCUTTINGWITHBEVELINGVALUE
SET BYPARAMETER.
SEE TOE-C843-9.20 PAR.2.8.26.2.
.—
065
Code
Causes
066
CANNOTCONTINUOUSTHREAD
TOOSHORTTIMEFOR1 BLOCKOF CONT[NUOUS
THREADCUTTING.
CHANGESPINDLESPEEDCOMMANDNOTTOOCCUR
THIS ERROR.
067
068
069
070
PROGERROR(M02/M30/M99)
MEMORYOPERATIONCOMPLETIONCOMMANDNOT
GIVEN.
PROGRAMMODESM02/M30/M99.
071
–70–