User Guide for the SIP-T19(P) E2 IP Phone
60
You can configure one or more dial-now rules (up to 100) on your phone. When the
dialed number matches the dial-now string, the number will be dialed out automatically.
For example, a dial-now rule is configured as "1xx", any entered three-digit string
beginning with 1 will then be dialed out automatically on the phone.
To add a dial-now rule via web user interface:
1. Click on Settings->Dial Plan->Dial-now.
2. Enter the desired value (e.g., 1xx) in the Rule field.
3. Click Add to add the dial-now rule.
When you enter the number ―123‖ using the keypad, the phone will dial out ―123‖
automatically without pressing any key.
Note
Delay Time for Dial-now Rule
You can configure the delay time for dial-now rules. That is, you can configure your
phone to automatically dial out the phone number which matches a dial-now rule, after
the designated delay time.
To configure the delay time for dial-now rule via web user interface:
1. Click on Features->General Information.
You can also edit or delete the dial-now rule, refer to Replace Rule on page 58 for more
information.
Dial-now rule is configurable via web user interface only.
To Next Page
Loading...
