Yealink SIP-T46G User Manual

Customizing Your Phone
113
Live Dialpad
You can enable live dialpad feature on the SIP-T46G IP phone, which enables the IP phone to
automatically dial out a phone number without pressing the send key. You can also configure a
delay, and then the phone will dial out the phone number automatically after the designated
period of time.
To enable the live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
The default delay time is 4s.
4. Click Confirm to accept the change.
Note
Hotline
You can dial a hotline number immediately upon lifting the handset, pressing the Speakerphone
key or the line key. You can also configure a delay, and then the phone will dial out the hotline
number automatically after the designated period of time.
To configure the hotline number via phone user interface:
1. Press Menu->Features->Others->Hot Line.
2. Enter the desired number in the Hotline Number field.
3. Enter the delay time in the Hotline Delay field.
Live dialpad is configurable via web user interface only.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm