Yealink SIP-T46G User Manual

Advanced Phone Features
183
If you enable visual alert feature, you can also pick up the target extension’s incoming call by
pressing the DPickup soft key. To use the DPickup soft key to pick up the call, the call pickup
code can only be configured on a global or per-line basis via web user interface. For more
information, refer to refer to Configuring Visual and Audio Alert for BLF pickup on page 162 and
Configuring Directed Call Pickup Code on page 164.
To pick up an incoming call when the monitored phone is ringing:
1. Press the intercom key.
The incoming call of the target extension is answered on the IP phone.
Note
Multicast Paging
You can use multicast paging to quickly and easily broadcast time sensitive announcements to
people who are listening to a specific multicast group. You can configure a multicast paging key
or paging list key on the phone, which allows you to send a Real Time Transport Protocol (RTP)
stream to the pre-configured multicast address(es) without involving SIP signaling. You can
configure the phone to receive an RTP stream from pre-configured multicast listening
address(es) without involving SIP signaling. You can specify up to 31 multicast listening
addresses.
Yealink IP phone supports the following 31 channels:
 0: It is the default channel. This channel is for compatibility with the Yealink IP phones
running firmware version 80 or prior and third-party devices.
 1 to 25: These channels are for compatibility with the Polycom IP phones.
 26 to 30: These channels are used for separate communication among the Yealink IP
phones running firmware version 81 or later.
The IP phones will automatically ignore all incoming multicast paging calls on the different
channel.
Sending RTP Stream
To configure a multicast paging key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Multicast Paging from the Key Type
field.
If the directed call pickup code is not configured, the phone will place a call to the target
extension instead of picking up an incoming call of the target extension when you press the
intercom key.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm