Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
170
Recording Using a USB Flash Drive
You can attach a USB flash drive to your IP phone when the phone is idle or during an active call.
This feature is not available by default. For more information, contact your system administrator.
When the phone is idle, and you insert a USB flash drive into the USB port on IP phone, the
phone will detect the USB flash drive and display a flashing icon . After detecting the USB
flash drive, the icon stops flashing and LCD screen prompts “USB device has been connected
successfully!”.
When there is an active call, and you insert a USB flash drive into the USB port on your phone,
the LCD screen will prompt “USB device has been connected successfully! Available Recording
Time: XX:XX:XX”. For more information on the available recording time, refer to Viewing the
Storage Space on page 175.
The following figure shows an example:
The Start REC soft key controls the recording function, and is available:
 The free space of USB flash drive is sufficient
 When there are one or more calls connected to your IP phone
 During an active call
 When calls are on hold or muted
 During an attended transfer
 During a conference call

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm