Yealink SIP-T46G

Getting Started
29
Activating the Wi-Fi Mode
To activate the Wi-Fi mode via phone user interface:
1. Press Menu->Basic->Wi-Fi.
2. Press or , or the Switch soft key to select On from the Wi-Fi field.
3. Press the Save soft key.
The IP phone scans the available wireless networks in your area.
When Wi-Fi USB dongle WF40 is connected to the USB port at the back of the IP phone, the LCD
screen will prompt “Wi-Fi adapter has been added, scanning the available wireless network right
now?”. You can press the OK soft key to activate Wi-Fi mode directly and scan Wi-Fi devices
automatically.
Connecting to the Wireless Network
Three ways to connect SIP-T46G IP phone to the wireless network:
 Manually connect to an available wireless network
 Wi-Fi Protected Setup (WPS)
 Manually add a wireless network