Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
130
3. Click Confirm to accept the change.
Note
To enable DND in phone mode:
1. Press the DND soft key when the phone is idle.
The icon appears on the status bar.
Note
To enable DND in custom mode:
1. Press the DND soft key when the phone is idle.
The LCD screen displays a list of accounts on the phone.
2. Press or to select the desired account, and then press the Enter soft key.
3. Press or , or the Switch soft key to select Enabled from the DND Status field.
4. (Optional.) Enter the DND on code or off code respectively in the On Code or Off Code
field.
If the on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate DND on the server. It is not available on all servers.
5. Press the Save soft key to accept the change.
DND mode is configurable via web user interface only.
When DND and busy forward are enabled in phone mode, calls will be sent to the configured
destination number. For more information on busy forward, refer to Call Forward on page 133.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm