User Guide for the SIP-T46G IP Phone
136
Forward to field.
3) (Optional.) Enter the always forward on code or off code respectively in the On
Code or Off Code field.
You can also enable always forward for all accounts. After always forward was enabled
for a specific account, do the following:
1) Press or to highlight the Always Forward field.
2) Press the All Lines soft key.
The LCD screen prompts “Copy to all lines?”.
3) Press the OK soft key to accept the change or the Cancel soft key to cancel.
b) If you select Busy Forward, you can enable it for a specific account.
1) Press or , or the Switch soft key to select Enabled from the Busy
Forward field.
2) Enter the destination number you want to forward incoming calls to when the
phone is busy in the Forward to field.
To Next Page
Loading...
