Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
140
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When call forward is enabled on the phone, the phone cannot forward incoming calls from
the numbers specified in the Forward Authorized Numbers field.
Note
To disable call forward in phone mode:
Do one of the following:
- Press when the phone is idle.
- Press Menu->Features->Call Forward.
Press or to select the desired forwarding type and then press the Enter soft key.
Press or , or the Switch soft key to select Disabled to disable the call forward.
Press the Save soft key to accept the change.
To disable call forward in custom mode:
1. Press Menu->Features->Call Forward or press when the phone is idle.
2. Press or to select the desired account and then press the Enter soft key.
3. Press or to select the desired forwarding type and then press the Enter soft key.
4. Press or , or the Switch soft key to select Disabled to disable the call forward.
If you want to disable call forward for all accounts, press the All Lines soft key.
5. Press the Save soft key to accept the change.
Forward authorized number is configurable via web user interface only.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm