User Guide for the SIP-T46G IP Phone
142
- Enter the number you want to transfer the call to.
Press or the Transfer soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
- Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 61 for more information).
Press , or the Send soft key to complete the transfer.
- Press the Directory soft key, and then select History. Select the desired list and then
press or to select the entry (Directory should be configured in advance.
Refer to Directory on page 61 for more information).
Press , or the Send soft key to complete the transfer.
- Press the Directory soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 61 and Remote Phone Book on page 76 for more information).
Press , or the Send soft key to complete the transfer.
To perform a blind transfer to exist call:
1. Press or the Transfer soft key during a call.
2. Press or to select the desired hold call you want to transfer the call to.
3. Press , or the Transfer soft key to complete the transfer.
Then the call is connected to the number to which you are transferring.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
