Yealink SIP-T46G User Manual

User Guide for the SIP-T46G IP Phone
150
- If the call park code is configured, the phone will dial the configured call park code
shown as below:
2. Do one of the following:
a) If you want to park the call against the local extension.
1) Press .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
b) If you want to park the call against desired extension.
1) Enter an extension (e.g., 4605) where you want to park the call.
2) Press or .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).
- If the park retrieve code is configured, press the Retrieve soft key on the dialing
screen or retrieve key (if configured) on the IP phone.
The phone will dial the configured park retrieve code and the Retrieve screen appears
as below:

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm