User Guide for the SIP-T46G IP Phone
172
Press the Start REC soft key to start recording again, the recording will be saved in a new
“.wav” file.
- Press or the Hold soft key while recording, recording is paused. Then appears
on the LCD screen and the duration stops counting. Both you and the callee are not
recorded.
Press the Resume soft key to resume the call, the recording is continued.
- Press while recording, the muted party is not recorded.
- If there is insufficient free space (less than 30 minutes) on the USB flash drive during
recording, the LCD screen prompts the following:
Press the Cancel soft key to return to the previous screen.
- If there is insufficient free space (less than 10 minutes) on the USB flash drive during
recording, the LCD screen prompts the following:
Press the Cancel soft key to return to the previous screen.
If no free space of the USB flash drive during recording, recording is stopped and saved on the
USB flash drive automatically. The record soft keys disappear. You cannot record a call unless
the space of your USB flash drive is released.
Note
When you end a call while recording, the recording will be stopped and saved as *.wav files on
You can transfer or set up a conference call while recording. All the calls are recorded in the same
way and will be saved in as a “.wav” file.