User Guide for the SIP-T46G IP Phone
64
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 61), press
Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group.
3. Press the Option soft key, and then select Detail from the prompt list.
4. Press or to highlight the group information and then edit.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Deleting Groups
To delete a group from the local directory:
1. Press the Directory soft key.
To Next Page
Loading...
