Yealink W52P - Handset Information; Battery Information; Battery Capacity Details

Yealink W52P IP DECT Phones Configuring Guide
6
1. Connect the DC plug on the power adapter to the DC5V port on the charger cradle.
2. Connect the other end of the power adapter into an electrical power outlet.
To charge the handset:
1. After setting up the handset and charger cradle, place the handset in the charger
cradle.
The original handset included in the W52P package is pre-registered to the base station.
After charging, the handset is ready for use.
Battery Charging Status
The handset batteries take 6 hours to fully charge. Charging status of batteries is
displayed on the top right-hand corner of the LCD screen:
Icon Charging Status
Fully Charged
75% Charged
50% Charged