Yealink W52P

Customizing Your Phone
33
2. Select the desired value from the Handset Interface Language field.
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 17.
Ring tones are used to indicate incoming calls. You can set different ring tones to
distinguish the incoming lines from each other on your handset. You can also set a ring
tone for an incoming intercom call. When receiving an incoming call, the handset rings
the specified ring tone.
To configure ring tones via the handset:
1. Press to enter the main menu.
2. Select ->Audio->Ring Tones->Melodies.
3. Press or to highlight the Intercom Call option or the desired line.
4. Press or to select and listen to the desired ring tone.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To adjust ringer volume using the menu via the handset:
1. Press to enter the main menu.
2. Select ->Audio->Ring Tones->Volume.
3. Press or to decrease/increase the ringer volume.
4. Press the Save soft key to accept the change or the Back soft key to cancel.