Yealink W52P

Yealink W52P IP DECT Phones Configuring Guide
34
Advisory tones are acoustic signals of your handset, which inform you of different
actions and states. The following advisory tones can be configured independently:
 Keypad Tone: plays when a user presses any key of the keypad.
 Confirmation Tone: plays when a user saves settings or places the handset in the
charger cradle.
 Low Battery: plays when the capacity of the batteries is low and the handset
requires charging.
To configure advisory tones via CommPortal phone configurator:
1. Click on Preferences-> Advisory Tones.
2. Mark the desired radio box of the Keypad Tone Enable field.
3. Mark the desired radio box of the Confirmation Tone Enable field.
4. Mark the desired radio box of the Low Battery Tone Enable field.
5. Click Save changes to accept the change.
6. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 17.