Customizing Your Phone
37
2. Select the desired value from the Color Schemes pull-down list.
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 17.
You can enable the keypad light to make the keypad light up when any key is pressed.
This helps you distinguish keys from each other in a dark environment.
To configure keypad light via CommPortal phone configurator:
1. Click on Preferences->Display.
2. Mark the desired radio box of the keypad Light Enable field.
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 17.
Notification light is used to indicate voice mails and missed calls. When the handset
receives a voice mail or misses a call, the message key LED flashes red. You can
To Next Page
Loading...
