Yealink W52P

Customizing Your Phone
45
To delete all contacts via the handset:
1. Press to enter the main menu.
2. Select .
3. Press the Options soft key, and then select Delete All.
The LCD screen prompts “Delete All?”.
4. Press the Yes soft key to delete all contacts or the No soft key to cancel.
You can search for the contacts by simply entering a few continuous characters of the
desired contact name or number, and the results of potential matches are dynamically
filtered and displayed on the LCD screen.
To search for contacts in the local directory via the handset:
1. Press to enter the main menu.
2. Select .
3. Enter a few continuous characters of the desired contact name or number using the
keypad.
The contact whose name or number matches the search will appear on the LCD
screen after a timeout or when the Search soft key is pressed. You can dial a
contact from the result list.
To place a call from the local directory via the handset:
1. Press to enter the main menu.
2. Select .
3. Press or to highlight the desired entry.
4. Do one of the following:
- Press , if only one number is stored for the contact in the local directory, the
phone will dial out the number directly.
- Press , if both the office number and the mobile number are stored for the
contact in the local directory, the screen will display two numbers.
Press or to highlight the desired number.
Press to dial out.
You can store up to 30 contacts in one handset‟s blacklist. You can add, edit or delete
contacts in the blacklist. You can also dial a call from the blacklist, but an incoming call