Yealink W52P

Yealink W52P IP DECT Phones Configuring Guide
44
4. Enter the desired values in the Name, Number and Mobile fields respectively.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To add a contact to the local directory from the call history via the handset:
1. Press the History soft key when the handset is idle.
2. Press or to highlight the desired call history list, and press the OK key.
3. Press or to highlight the desired entry.
4. Press the Options soft key, and then select Add To Local->New Entry.
5. Press or to set the number to be the office number or the mobile number
of the new entry, and then press the OK soft key.
6. Enter the name of the new entry in the Name field.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To edit a contact in the local directory via the handset:
1. Press to enter the main menu.
2. Select .
3. Press or to highlight the desired entry.
4. Press the Options soft key, and then select Edit.
5. Edit the values in the Name, Number and Mobile fields respectively.
6. Press the Save soft key to accept the change.
You can delete a contact or all contacts from the local directory.
To delete a contact via the handset:
1. Press to enter the main menu.
2. Select .
3. Press or to highlight the desired entry.
4. Press the Options soft key, and then select Delete.
The selected entry will be deleted successfully.
When you add a contact, the office number and the mobile number cannot be left blank
at the same time. When the contact name is left blank, the handset sets the office
number or the mobile number as the contact name.
If the information of the contact you want to add is totally same with that of an existing
entry in the local directory, the screen will prompt “Contact save failed!”.