Yealink W52P

Customizing Your Phone
43
To configure the input method via the handset:
The handset provides you with 12 different input methods. You can disable the
infrequently used input method. Then you can only switch among the enabled input
methods when editing.
1. Press to enter the main menu.
2. Select ->Display->Input Method.
The LCD screen displays all available input methods.
3. Press or to highlight the desired input method.
4. Press the Change soft key to check or uncheck the checkbox.
To switch the input method via the handset:
1. Press when entering data.
The current input method is indicated on the bottom right-hand corner of the LCD
screen. For example, “ABC” represents the upper-case input method, “abc”
represents the lower-case input method and “123” represents the digital input
method.
To enter a character via the handset:
You can press a key one or more times (depending on the current input method) to enter
the characters displayed on the key.
To make a space via the handset:
1. Press when the input method is not “123”.
To move the cursor via the handset:
1. Press or to move the cursor.
To delete a wrong input character via the handset:
1. Position the cursor to the right of the wrong input character.
2. Press the Del soft key to delete the character.
You can add contacts to your local directory manually or from the call history. You can
also add contacts to your local directory from the remote phone book. For more
information, refer to Remote Phone Book on page 46.
To add a contact to the local directory manually via the handset:
1. Press to enter the main menu.
2. Select .
3. Press the Options soft key, and then select New Contact.
If there is no contact in the local directory, press the New soft key directly.