Yealink W52P Configuration Guide

Call Features
63
The W52P IP DECT phone is designed to be easily used like a regular phone on a public
switched telephone network (PSTN). You can place internal and external calls, answer
calls, transfer a call to someone else, or conduct a conference call.
This chapter provides operating instructions of the call features. Topics include:
 Placing Calls
 Off Hook Hot Line Dialing
 Answering Calls
 Ending Calls
 Redialing Calls
 Call Mute
 Call Hold/Resume
 Call Waiting
 Do Not Disturb (DND)
 Call Forward
 Call Transfer
 Conference Call
 Anonymous Call
 Anonymous Call Rejection
 Voice Mail
If you require additional information or assistance with your new phone, contact your
system administrator.
You can use your handset to place an internal or external call. You can place a call using
the following call modes:
 Earpiece mode—pressing the off-hook key to dial out.
 Speakerphone mode—pressing the speakerphone key to dial out.
 Headset mode—connecting a headset.
During the call, you can switch the call mode by pressing the corresponding keys or
connecting a headset.
You can cancel the dialing operation by pressing the on-hook key. During the call
conversation, you can press the left and right navigation keys to adjust the volume of

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm