Yealink W52P

Yealink W52P IP DECT Phones Configuring Guide
52
2. Mark the desired line in the Incoming Allowed Lines field.
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 17.
Speed dial allows you to perform single-digit dialing to predefined numbers. This
feature is particularly useful to speed up dialing the numbers that frequently used or
hard to remember. A maximum of 8 speed dial numbers are allowed.
For example, the digit key 2 is configured as a speed dial key and assigned the number
4606, the phone will dial out the number 4606 directly when you long press digit key 2.
You can assign the important numbers of your directory (including local directory and
remote phone book) to the speed dial keys of your handset. This helps you dial a
contact quickly and easily by long pressing the speed dial key without having to enter
the directory. The available speed dial keys are the digit keys 2-9.
To assign a speed dial number from the directory via the handset:
1. Press to enter the main menu.
2. Select ->Telephony->Speed Dial.
The LCD screen displays all available speed dial keys.
If the digit key did not be assigned numbers before, you can long press the digit key
when the phone is idle to enter the Speed Dial screen.
3. Press or to highlight the desired speed dial key, and then press the
Assign soft key.
4. Press or to highlight the desired directory if there are multiple
directories.
5. Select the desired contact from the directory.
6. Do one of the following: