Yealink W52P

Yealink W52P IP DECT Phones Configuring Guide
38
configure the notification light to indicate the voice mails or missed calls respectively.
To configure notification light via t CommPortal phone configurator:
1. Click on Preferences-> Notification Light.
2. Mark the desired radio box of the Voice Mail Notify Light Flash field.
- If Enabled is selected, the message key LED flashes red when the handset
receives a voice mail.
- If Disabled is selected, the message key LED won‟t flash when the handset
receives a voice mail.
3. Mark the desired radio box of the Missed Call Notify Light Flash field.
- If Enabled is selected, the message key LED flashes red when the handset
misses a call.
- If Disabled is selected, the message key LED won‟t flash when the handset
misses a call.
4. Click Save changes to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 17.
Note
Time and date are displayed on the idle screen of your handset. The handset obtains
the date and time from the Simple Network Time Protocol (SNTP) server by default. If
your handset cannot obtain the date and time from the SNTP server, you need to
configure the date and time manually.
When you press the Message key to view the missed calls or the received messages, the
message key LED will go out.