Yealink W52P - Contact Management Details; Local Directory Management; Adding Contacts

Customizing Your Phone
39
To configure the NTP server, time zone and DST via CommPortal phone configurator:
1. Click on Preferences->Time&Date.
2. Select NTP from the Obtain Time Method pull-down list.
3. Select the desired time zone that applies to your area from the Time Zone
pull-down list.
The default time zone is "Match My Account". This means the phone will support DST
& timezone sync settings with the Metaswitch EAS/CFS account.
4. Enter the domain names or IP addresses in the Primary NTP Server and Secondary
NTP Server fields respectively.
5. Enter the desired interval to update time and date from the NTP server in the NTP
Query Interval field.
6. Mark the Enabled radio box in the Daylight Savings field.
7. Do one of the following:
a) Select DST By Date from the Fixed Type field.
1) Enter the start time in the Start Date field.
2) Enter the end time in the End Date field.
Value format is: Month/Day/Hour.
The mapping is:
 For month: 1=Jan, 2=Feb,…, 12=Dec;
 For day: 1=the first day in a month,…, 31= the last day in a month;
 For hour: 0=0am, 1=1am,…, 23=11pm.
b) Select DST By Week from the Fixed Type field.
1) Enter the start time in the Start Date field.
2) Enter the end time in the End Date field.
Value format is: Month/ Day of Week/ Day of Week Last in Month/ Hour of