Yealink W52P - Switching Silent Mode; Locating a Handset

Yealink W52P IP DECT Phones Configuring Guide
26
To register an account via CommPortal phone configurator:
1. Click on Line X->User.
2. Enter the desired values in Directory Number and Display Name fields respectively.
3. Select the desired value from the Description field.
4. Depending on your selection:
- If you select Use directory number, the directory number will act as the
account label to be displayed on the idle screen.
- If you select Use extension, the extension will act as the account label to be
displayed on the idle screen.
- If you select Custom description, you can customize the label to be displayed
on the idle screen in the Custom Description field.
5. Click on Line X->SIP Server.
6. Enter the desired values in the SIP Server Address field. Contact your system
administrator for more information.
You can repeat steps 2 to 7 to register more accounts.
7. Click Save changes to accept the change.
8. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 17.