Yealink W52P - Call Hold;Resume; Call Waiting Feature

Yealink W52P IP DECT Phones Configuring Guide
66
 Using the headset
Note
Answering When Not in Another Call
In all cases, the active call will appear on the LCD screen showing call duration and
destination.
To answer a call using the earpiece:
1. Press or the Accept soft key.
To answer a call using the speakerphone mode:
1. Press .
To answer a call using the headset:
1. With a headset connected, press the Accept soft key.
Answering When in Another Call：
If you are during an active call, an incoming call arrives on the handset, do the
following:
1. Press , , or the Accept soft key.
The incoming call is answered, and the original call is placed on hold.
To end a call:
Do one of the following:
- Press .
- Place the handset in the charger cradle.
The redial number list stores the twenty last dialed phone numbers. When the memory
of the redial number list is full, the handset will automatically erase the oldest dialed
number when a new number is dialed. You can redial a call from the redial number list.
To redial the last dialed number:
1. Press when the handset is idle.
You can ignore an incoming call by pressing the Silence soft key or reject an incoming
call by pressing the on-hook key.
You can also activate Do Not Disturb mode on a per-line basis to reject all incoming calls
of the specified line.