Yealink W52P - Shared Call Appearance (SCA)

Call Features
77
The LCD screen displays the lines assigned to the handset as incoming lines and
outgoing lines simultaneously.
3. Press or to highlight the desired line and press the Select soft key.
The radio box of the selected line is marked.
To listen to the voice mail using the menu via the handset:
1. Press to enter the main menu.
2. Select ->Play Message.
The LCD screen displays the lines assigned to the handset as incoming lines and
outgoing lines simultaneously, and the number of voice mails for each line.
3. Press or to highlight the desired line, and then press the Select soft key.
The handset dials out the voice mail access code using the selected line
automatically.
4. Follow the voice prompt from the system server to listen to your voice mails.
To listen to the voice mail via fast access via the handset:
1. Long press when the handset is idle.
The handset automatically dials out the voice mail access code using the line you
selected when configuring fast access for voice mail.
2. Follow the voice prompt from the system server to listen to your voice mails.
You can also listen to the voice mail by pressing to enter the Messages & Calls
screen. Select the desired line and press the Select soft key.
Note
Voice Mail Tone
You can enable or disable the phone to play a warning tone when receiving a voice
mail. Voice mail tone is enabled by default.
To configure the voice mail tone via CommPortal phone configurator:
1. Click on Features->VoiceMail.
2. Mark the desired radio box of the Play Warning Tone for VM field.
Before listening to the voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the icon will disappear from the screen.