Troubleshooting
81
Why do I hear some noise during a call?
Ensure that you are not using the handset or base station in an area with high
electrical interference. You can reposition the handset and the base station to keep
them far away from sources of high electrical interference.
Ensure that the handset is not too far from the base station.
Restart the base station and place a call to see if there is still noise heard during the
call.
Can I transfer an internal call to another party?
The phone does not support this feature. You can only transfer external calls from the
phone.
How to reset the system PIN?
1. Disconnect the power adapter.
2. Long press the paging key and reconnect the power adapter.
When base station finishes reset, the power indicator LED, network status LED and
registration LED illuminate in sequence. System PIN and all individual settings are
reset to factory defaults. Handset registrations will also be cleared after base
station reset.
To Next Page
Loading...
