Yealink WH6 Series - What Do the Buttons and Leds on the WH62;WH63 Base Mean; How to Reset My WH6 X to the Default Settings on the Base; How to Reset My WH6 X to the Default Settings Using Yealink USB Connect

WH6X Frequently Asked Questions
10
14.What do the buttons and LEDs on the WH62/WH63 base
mean?
LED
Base State
PC/desk phone button
Off
PC/desk phone device is not connected
Glows white
PC/desk phone device is connected and in the idle status
Glows green
In the call
Fast flashes green
Ringing
Flashes green in double
Hold
Teams button
Off
Teams disconnected
Glows white
Teams connected
Slowly-flashing white
Receive missed calls/voice mails/Teams connecting
15.How to reset my WH6X to the default settings on the base？
When you reset your WH6X, previously paired devices and settings will be cleared.
For WH62/WH63:
1. Hold the PC button and Phone button for 6 seconds.
For WH66/WH67:
16.How to reset my WH6X to the default settings using Yealink
USB Connect?
Prerequisites
The firmware version of Yealink USB Connect should be 0.32.69.0 or later.
Procedure