WH6X Frequently Asked Questions
11
1. Run Yealink USB Connect.
2. Go to Device recovery->Restore factory settings.
3. Confirm the action.
Note: When you have reset your device, you will need to repair it with any previously paired devices,
such as your smartphone or the BT50.
The above screenshot is for guidance purposes only. Actual text may vary depending on your headset
model.
17.Why is the time on my WH66/WH67 base not synchronized
with the PC?
Check if you have installed and run the Yealink USB Connect on the PC, the device time will
automatically synchronize with the PC time when you connected WH66/WH67 to the PC. Otherwise, you
need to set the time manually at the Basic Settings menu on the base.
Related Question:
How to access the menu on my WH66/WH67?
18.How to access the menu on my WH66/WH67?
For Teams version:
Tap or the user account avatar in the upper-left corner of the screen.
You can view three menu options:
Redial
Bluetooth
Settings (including Status, Basic Settings, and Advanced Settings)
To Next Page
Loading...
Need help?
General
